§ 21-41. RM, Manufactured Home Park.

(a)

Permissible Future Land Use classifications. Residential—Low density and Traditional Neighborhood Area.

(b)

The RM, Manufactured Home Park zoning district is established for the purpose of providing a district for manufactured homes in approved parks and subdivisions, occupied as single-family dwellings, with the intent of creating an environment of a residential character, designed to enhance living conditions and permitting only those uses, activities and services which are compatible with the residential environment. The RM zoning district is a residential district with a maximum density of eight (8) dwelling units per gross acre. The regulations contained in this section are intended to protect the residential character of manufactured home parks.

(c)

Building form standards. All development within the RM zoning district shall follow the building form standards as set forth below in Table 21-41.

Table 21-41
RM Zoning District Development Standards

Lot and Building Standard		Requirement
Lot/Parcel Size	Area	Minimum 3,200 square feet
	Width	Minimum 40 feet
	Depth	Minimum 80 feet
Living Area		Minimum 500 square feet
Building Setbacks	Front	Minimum 10 feet
	Side	Minimum 5 feet
	Street Side	Minimum 10 feet
	Rear	Minimum 5 feet
Building Height		Maximum 35 feet
Impervious Surface Ratio	Individual Lot	Maximum 80 percent
	Park	Maximum 60 percent

 

(d)

Other requirements:

(1)

Manufactured homes must be skirted within thirty (30) days of siting.

(2)

Clubhouses and similar facilities are permitted on parcels retained by the developer or dedicated to and maintained by a homeowners association.

(3)

See Article III, Division 11 for additional development standards for manufactured home parks.

(4)

Home occupation uses are permitted as long as they are an activity conducted in a residential dwelling unit that employs on-site only members of the immediate family residing there. Specific regulations are contained in section 21-221 of this Code.

(Ord. No. O-00-09, Art. 2 (2.02.03.08), 4-24-00; Ord. No. O-00-19, § 3(F), 4-24-00; Ord. No. O-17-40 , § 6, 10-23-17)